| Customization: | Available |
|---|---|
| After-sales Service: | Video Technical Support, Online Support |
| Warranty: | 24months |
|
Still deciding? Get samples of US$ 1/Piece
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Factory Direct Small Mini Hydraulic Skid Steer Loader with Various Attachments Load Wheel Loader
| PARAMETER | RG525 (Metric Units) |
RG525 (US Units) |
| DIMENSIONS | Parameter | Parameter |
| A. Angle of Departure | 19° | 19° |
| B. Carry Position | 206 mm | 8 in |
| C. Dump Angle @ Maximum Height | 36° | 36° |
| D. Dump Height with Standard 49.2" Bucket | 1272 mm | 50 in |
| E. Dump Reach @ Maximum Height | 815 mm | 32 in |
| F. Ground Clearance | 159 mm | 6 in |
| G. Ground Clearance(Under Platform) | 180 mm | 7 in |
| H. Height to Bucket Hinge Pin | 1883 mm | 74 in |
| I. Height | 1352 mm | 53 in |
| J. Length without Attachment | 1976 mm | 78 in |
| K.Length with Standard Bucket | 2637 mm | 104 in |
| L. Operating Height | 2649 mm | 104 in |
| M. Rollback @Carry Position | 22° | 22° |
| N. Rollback Fully Raised @ Maximum Height |
94° | 94° |
| O. Ground Contact Length | 918 mm | 36 in |
| P. Turning Radius with Standard 49.2" Bucket | 1593 mm | 63 in |
| Q. Machine Width | 1104 mm | 43 in |
| R. Wheel Tread (over tracks) | 904 mm | 36 in |
| S. Width with Standard 49.2" Bucket | 1250 mm | 49 in |
| RG525 | |
| PERFORMANCE | Parameter |
| Operating Capacity (35%) | 291 kgs / 642 lbs |
| Operating Capacity (50%) | 416 kgs / 917 lbs |
| Tipping Capacity | 832 kgs / 1834 lbs |
| Max. Travel Speed | 5.6 km/h (3.5 mph) |
| Machine Weight (no attachment) |
1060 kgs / 2336 lbs |
| Standard Bucket | 49.2" Bucket: 90 kgs(198 lbs) / 0.2 cbm(7 ft³) |
| ENGINE/ELECTRICAL | Parameter |
| Make/Model | Kubota D1105 (EU Stage 3rd B / EPA Tier 4 Final) |
| Fuel/Cooling | Diesel/Liquid |
| Horsepower (SAE Gross) | 18.5 kW / 25.2HP |
| Maximum Governed RPM | 3000 RPM |
| Torque | 71.5 Nm @2200 RPM(SAE Net) |
| Number of Cylinders | 3 |
| Displacement | 1.123 L (68.5 ft³) |
| Bore/Stroke | 78 mm(3.1in) / 78.4 mm(3.1in) |
| Fuel Consumption | 6.1 L/h |
| Lubrication | Gear Pump Pressure |
| Crankcase Ventilation | Closed |
| Air Cleaner | Dry replaceable cartridge with safety element |
| Ignition | Diesel-Compression |
| Engine Coolant | Propylene glycol/water mix (53%-47%) with freeze protection to -37°C |
| Starting Aid | Glow plugs |
| Alternator | Belt Driven; 40 amps; Open |
| Starter | 12 volt; Gear Reduction Type; 1.4 kW |
| Battery | 12 V; 45 Ah |
| HYDRAULIC SYSTEM | Parameter |
| Pump Type | Engine driven, Two Gear type |
| Pump Capacity | 53.1 L/min@ 3000 RPM 14 gpm@ 3000 RPM |
| Pump 1 flow | 33.9 L/min (8.95 gpm) |
| Pump 2 flow | 19.2 L/min (5.07 gpm) |
| Main Control Valve | 1 set; 5-Spool, open center series parallel configuration |
| Auxiliary Control Valve | 1 set; 2-Spool, open center series parallel configuration |
| Hydraulic Filter | Replaceable 10 micron filtration |
| Hydraulic Cylinders | Double-acting |
| Lift Cylinder Bore*Rod *Stroke |
45*25*295 mm |
| Tilt Cylinder Bore*Rod *Stroke |
55*30*280 mm |
| Telescoping Cylinder Bore*Rod *Stroke |
/ |
| Hose Quick Couplers | 1 set: On operator's right hand side, drive attachment with cylinder; 1 set: On operator's left hand side, drive attachment with motor, even with hydraulic flow return; |
| System Relief @ Quick Couplers | 210 Bar (3046 psi) |
| Hydraulic Function Times | Hydraulic Function Times |
| Raise Lift Arms | 3.5 Seconds |
| Lower Lift Arms | 2.4 Seconds |
| Bucket Dump | 2.5 Seconds |
| Bucket Rollback | 1.8 Seconds |
| DRIVE SYSTEM | Parameter |
| Main Drive | Right Hydraulic Motor drives right side track Left Hydraulic Motor drives left side track |
| Transmission | Direct drive of hydraulic motor to main undercarriage drive sprocket |
| Tracks | 200 mm wide |
| Rollers | 3 Each side |
| Prssure to the Ground | 25.3 kPa/0.253 Bar/3.67 psi |
| CAPACITIES | Parameter |
| Cooling System | 5.2 L (1.37 gal) |
| Engine Oil with Filter | 5.1 L (1.34 gal) |
| Fuel Tank | 35 L (9.24 gal) |
| Hydraulic Reservoir | 34 L (8.98 gal) |
| Hydraulic System | 40 L (10.6 gal) |
| CONTROLS | Parameter |
| Engine Starting Aid | Power main switch on right side of Machine. Preheating function in cold weather. Key-type starter switch and shutdown; Glow Plugs - Activated by key switch. |
| Engine Power Output | Turn right or left, Push or Pull by a red throttle button. |
| Hydraulic Flow Share | Share hydraulic flow by a throttle button between driving tracks and working auxiliary |
| Skid Direction and Speed | Direction and speed controlled by two handles (Each handle controls the same side drive motor direction and speed) |
| Arms Lift & Tilt (rear or front direction and flow) Front Auxiliary Quich Change Plate (right or left drection and flow) |
Controlled by one hand lever |
| Travel Speed Stage | Faster or slower gears positioned by a hand lever |
| Auxiliary Pressure Release | Fore and aft movement of hand lever(right side) after engine has been shutting off. |
| Service Brake | / |
| Parking Brake | / |
1. who are we?
){kind=link}